Oil and Water Separation Lamella Clarifier Plant Water Separation

• Customization: Available
• After-sales Service: Yes
• Warranty: 2 Years
• Model NO.: QD-EVU-20
• Method: Physical Treatment
• Usage: Industrial, Agriculture, Hospital
• Material: Stainless Steel/Carbon Steel
• Motor: German
• Operation: Automatic
• Main Power: 0.75-22kw
• Function: Remove Cod BOD
• After-Sale Service: Long Term
• Flow Rate: Meet Client′s Need
• Transport Package: Standard Shipping Package
• Specification: 3.0m× 1.0m× 1.2m
• Trademark: Spark
• Origin: Qingdao China
• HS Code: 8421219990
• Production Capacity: 1000 Sets/Year
• Package Size: 1200.00cm * 250.00cm * 220.00cm
• Package Gross Weight: 10000.000kg

Product Description

EVU LAMELLA CLARIFIER

HOW DOES IT WORK?

The Lamella clarifier works when a solid/liquid stream that has been flocculated, enters a tank, and flows upward between a pack of inclined plates. The solids fall to the plate surface, where they slide by gravity down to a sludge collection hopper. The clarified effluent flows through orifice holes and exits the top of the settler.

LAMELLA CLARIFIER APPLICATION

• Potable water clarification
• Industrial process water
• Sand filter backwash
• Metal finishing
• Mining
• Groundwater
• River pre-sedimentation

INCLINED PARALLEL PLATE CLARIFIER OPTIONS & FEATURES

• Unit is Completely Assembled
• Low Installation
• Conservative Design 0.2 GPM/Ft2
• Completely Automatic, Gravity in Gravity Out
• Reduced Floor Space
• Large Compartment Flocculation Tanks with Mixer for Extra Retention Time (approximately 50-60 minutes)

CLARIFIER FAQ'S

What type of routine maintenance is needed for a clarifier?

Maintenance for a clarifier is minimal.  There are few moving parts, if any.  Metering pumps for flocculation as well as the mixer should be inspected and maintained according to the OEM guidelines.  The clarifier itself will only require and occasional clean out by draining the unit and hosing off any residual sludge at the plate packs and in the cone(s).  If the sludge is pumped out regularly, as needed, without allowing the sludge of override the plate pack, this will seldom be required.

 

Will a clarifier remove grease and oil?

It is best to remove oil and grease before sending a waste stream to the clarifier.  The EVU clarifier is equipped with an outlet skimmer that will hold captive a small amount of free oil, but this is only a safety net for a small amount of oil the was not properly removed.  The operator will need to skim off any oil that is captured by this skimmer.

 

Do I need to replace the plate pack on my clarifier?

Normally the plate pack will only be damaged when someone attempts to walk on the plate pack and physically breaks it.  Over time and depending on the chemistry involved, it may become brittle, but should not break unless abused.

What is retention time and hydraulic loading?

The two most important aspects of any clarifier are; retention time and the surface area (hydraulic loading).  Retention time is the time required for a drop of water to flow from the inlet to the outlet.  The greater the retention time, the longer the water will stay in the clarifier (the slower the flow rate) and the more time the solids will have to settle out.  A proper minimum retention time will be 50-60 minutes.Hydraulic loading is the relationship between the effective surface area to the flow rate.  A typical Met-Chem hydraulic load would be 0.2 GPM of flow to every square foot of surface area offered in the plate pack.

CONTACT US

THIS IS NICK, PLEASE KEEP ME IN YOUR FILE AND I AM READY... ......

Technical Data Sheet

Data Model	EVU-5	EVU-10	EVU-20	EVU-30	EVU-40	EVU-50	EVU-60	EVU-80	EVU-100
Capacity(m^3/h)	5	10	20	30	40	50	60	80	100
Motor power(kw)	/		0.55
Scraper travelling speed(m/min)	/		2.26	2.1	2.3	2.5	2.55	2.64	2.82
Inclined plate quantity (pc)	10	15	38	46	50	56	58	60	64
Inclined plate size(mm)	1060*1200	1350*1465	750*1600	900*1600	1050*1600	1110*1600	1150*1800	1200*1200	1300*2000
Equivalent settling area(m^2)	6.36	14.83	22.8	33.12	42	49.7	60.03	72	83.2
Length (mm)	2400	3000	3750	4050	4340	4525	4725	4975	5175
Width (mm)	1340	1740	2220	2520	2820	3090	3190	3290	3490
Height(mm)	3050	3200	4650	4650	4700	4900	5100	5330	5330
The height from inlet pipe to ground (mm)	1300	1250	3350	3350	3350	3600	3650	3825	3825
The height from outlet pipe to ground (mm)	2550	2680	3400	3400	3450	3450	3650	3825	3825
Inlet pipe(mm)	DN80	DN100	DN125	DN150	DN150	DN150	DN150	DN200	DN200
Outlet pipe(mm)	DN80	DN100	DN125	DN150	DN150	DN150	DN150	DN200	DN200
Sludge discharge pipe(mm)	DN150		DN200
Inspection manhole(mm)	/		DN600