Wave Separator in River Cleaning Sludge Thickening and Dewatering Machine

• Customization: Available
• After-sales Service: Engineers Avaiable for Technology Assistance
• Warranty: 1 Year
• Model NO.: QDLX
• Method: Combined Treatment
• Usage: Industrial, Agriculture, Hospital
• Condition: New
• Service Life: 20 Years
• Motor: Sumitomo Nissei Sew
• After-Sale Service: Long Term
• Material: SS304 SS316
• Advantage: Clog Free
• Operation: Automatic
• Capital Investment: Low
• Operation Cost: Less
• Design: Customize
• Sludge Cake Water Content: 85%
• Dried Sludge: 10-30kg/H
• Volage: 220V 380V 415V
• Supporting Machine: Chemical Dosing Machine
• Transport Package: Standard Shipping Package
• Specification: 4.5m*1.65m*2.13m
• Trademark: Spark
• Origin: Qingdao China
• HS Code: 8421219990
• Production Capacity: 1000 Sets/Year

Product Description

SCREW PRESS DEWATERING MACHINE

Sludge dewatering screw press is a screw press that separates liquids from solids. A screw press can be used in place of a belt press, centrifuge, or filter paper. It is a simple, slow moving device that accomplishes dewatering by continuous gravitational drainage. Screw presses are often used for materials that are difficult to press, for example those that tend to pack together. The screw press squeezes the material against a screen or filter and the liquid is collected through the screen for collection and use.

Advantages
Low operation cost: less than 40% of that of belt filter press, and less than 20% of that of centrifugal dewaterer;
Power saving: less than 5% of that consumed by the centrifugal dewaterer; water saving: less than 0.1% consumed by the belt filter press; and medicine saving: saved by 60%
Small volume: save the investment into dewatering room; non-blocking: the strong opponent against oil and fiber sludge;





Sludge Treatment Process


Multi-disk screw press, also known as MDS dewatering press, is a kind of cutting edge sludge dewatering equipment with non-clogging design and low energy consumption, especially applicable for oily sludge.




QDEVU Dewatering Machine Parameter

MODEL	DS STANDARD CAPACITY (KG/H)		FLOW LOAD (M3/H)
	LOW CONCENTRATION	HIGH CONCENTRATION	2000MG/L	10000MG/L	20000MG/L	30000MG/L	50000MG/L
QDLX-131	4	26	26	0.6	0.5	0.87	0.4
QDLX-132	8	52	52	1.2	1.0	1.73	0.8
QDLX-201	8	52	52	1.2	1.0	1.73	0.8
QDLX-202	16	104	104	2.4	2.0	3.47	1.6
QDLX-301	20	130	130	3.0	2.5	4.33	2.0
QDLX-302	40	260	260	6.0	5.0	8.67	4.0
QDLX-303	60	390	390	9.0	7.5	13	6.0
QDLX-351	40	260	260	6.0	5.0	8.67	4.0
QDLX-352	80	520	520	12	10	17.3	8.0
QDLX-353	120	780	780	18	15	26	12
QDLX-354	160	1040	1040	24	20	34.68	16
QDLX-402	135	884	884	20	17	29.5	13.6
QDLX-403	200	1326	1326	30	25.5	44.2	20.4
QDLX-404	266	1768	1768	40	34	58.9	27.2

Dewatering Principle

The initial section of dewatering drum is the thickening zone, where the solid-liquid separating process takes place and where the filrate will also be discharged.The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the end plate further increases the pressure, so as to discharge dry sludge cake.

Main Features & Comparison


Application

Certificates

Qingdao EVU Environmental & Engineering Equipment Co.,Ltd(EVU) has key technological inputs from it's  German partners and over more than 20 years water treatment experience.
Engaged in engineering consulting, design, general contracting and equipment manufacturing of  water treatment equipment. Its business spectrum covers both domestic and industrial waste water treatment, pure water treatment, seawater desalination and water recycling. 
EVU has very strong commitment  to the four cardinal principles of quality standards, system stability, cost control and service-oriented principles as the basis for its survival and development.
 

FAQ:

1.Q:Are you a factory or trading company?
 A:We are a factory ,we have rich experience for manufacuring water processing equipment for  more than 20 ears.

2.Q:Where is your factory located? How can I visit there?
   A:Our factory is located in No84, Huantaibei Road, Wangtai, Huangdao, Qingdao, , China .It is about 1 hours  from Qingdao airport, Qingdao train station . We can pick you up if you need ,welcome to visit our factory any time.

3.Q:How to buy your idea products?
A:You can provide us your sewage sources,sewage quality  ( COD, BOD, SS) , flow rate and ground area (connect us for more details)

4.Q:Do you have certificates?
   A:Yes,we have CE, ISO9001, ISO14001,SGS certificate.

5.Q:Can you meet my special requirements or my products?
 A:Yes,we have a professional design team.We can provide drawings according to your requirements.

6.Q:How to pay?
  A:T/T and L/C are acceptable and T/T will be more appreciated 30% deposit before  producing,70% balance before loading by T/T.

7.Q:What is the delivery time ?
  A: Generally ,delivery time will be within 20-30 woking days.It depends on order quantity

8.How to install after the equipments arriving destination?              
A: We will provide detailed illustrations to you. And if need, we will send a technicians to guide for installation and debugging. after debugging equipment, we will teach your workers how to use it and how to maintain it.
 

9.Q:How to pack the products?
  A:standard package.

10.Q:How to keep your equipments from corrosion?
A:We use the world-famous paint ,like Sigma Coatings ,Pain ,Bow, etc. What's more ,we paint strictly according to the standard process.

11.Q:How about the warranty?
A: If there is any malfunction of the equipment during the warranty period, our company promises to propose a solution within 24 hours. If it is caused by non-human causes, our company provides repairs free of charge and guarantees that the equipment is running well again.